Description

What’s included: Fenix HP25R V2.0 headlamp, head strap with crown strap, rechargeable battery, USB-C cable, 4 hard hat attachment hooks, 3 cable clips, spare O-ring

Features of Fenix HP25R V2.0 USB-C Rechargeable Headlamp:
• high output spotlight, neutral white floodlight plus low light red
    ☼ Turbo spot – 1,600 lumens, 2 hours, 290 meters
    ☼ High spot – 1,000 lumens, 4 hours, 228 meters
    ☼ Medium spot – 400 lumens, 8 hours, 140 meters
    ☼ Low spot – 150 lumens, 24 hours, 83 meters
    ☼ Eco spot – 15 lumens, 56 hours, 59 meters
    ☼ High flood – 400 lumens, 8 hours, 50 meters
    ☼ Medium flood – 150 lumens, 24 hours, 30 meters
    ☼ Low flood- 5 lumens, 400 hours, 8 meters
    ☼ Red – 5 lumens, 400 hours, 6 meters
    ☼ Red SOS – 5 lumens, 800 hours, 6 meters
• maximum beam range of 951 feet (290 meters)
• water resistant to IP66 standard
• 60 degree tilting
• durable and lightweight aluminum construction
• powered by a single Fenix 21700 Li-ion rechargeable battery (included)
    ▹ refer to manufacturer instructions for warnings regarding battery usage
• attach included USB-C cable to battery pack for charging
    ▹ charging indicator near charge port will change from red to green when charging is complete
• battery status indicator located between switches
    ▹ quick press either switch to display battery status for 3 seconds
    ▹ green – 100-85%
    ▹ flashing green – 85-50%
    ▹ red – 50-25%
    ▹ flashing red – 25-1%
• 2 pushbutton switches
    ▹ press right switch for 0.5 seconds for spot
    ▹ press again to change brightness
    ▹ always turns on in last mode used when light was switched off
    ▹ press left switch for 0.5 seconds for flood or red
    ▹ press again to change brightness or for red modes
    ▹ always turns on in last brightness level and mode used when light was switched off
    ▹ Note: spot and flood can be switched on simultaneously; spot and red can be switched on simultaneously
• lockout function prevents normal switch operation (useful for transport)
    ▹ press and hold one or both switches for 3 seconds
    ▹ 4 red blinks designate locked status
    ▹ to unlock, press and hold both switches for 3 seconds
    ▹ 4 red blinks then steady red will be activated to indicate normal operation is restored
• Intelligent Overheat Protection
    ▹ brightness automatically drops down a few lumens when internal temperature reaches 60°C