Description

What’s included: Fenix HP16R headlamp, rechargeable battery, USB-C cable, head strap with top strap, spare O-ring, helmet clips (for attaching headlamp to a hard hat), mesh storage bag

Features of Fenix HP16R Rechargeable Headlamp:
• brightness, runtime and beam range specs
    ☼ spot turbo spot – 1250 lumens, 4 hours, 255 meters
    ☼ spot high – 400 lumens, 8 hours, 149 meters
    ☼ spot medium – 150 lumens, 12 hours, 88 meters
    ☼ spot low – 50 lumens, 36 hours, 52 meters
    ☼ flood high – 400 lumens, 8 hours, 48 meters
    ☼ flood medium – 150 lumens, 12 hours, 30 meters
    ☼ flood low – 5 lumens, 300 hours, 6 meters
    ☼ red – 5 lumens, 300 hours, 6 meters
    ☼ flashing red – 5 lumens, 600 hours, 6 meters
• maximum beam range of 853 feet (260 meters)
• neutral white flood LED, 4500K, 75CRI
    ▹ doesn’t wash out colors
• water resistant to IP68 standard
• high quality aluminum and polymer construction
• powered by one rechargeable battery; refer to manufacturer instructions for warnings regarding battery usage
    ▹ compatible with four AA NIMH rechargeable or alkaline non-rechargeable batteries; never mix battery types, brands or new and used batteries
• USB-C charging
    ▹ included battery charges inside of the battery compartment
    ▹ attach included cable to USB-C port on battery compartment for charging
    ▹ indicator on battery compartment changes from red to green when charging is complete
• 2 pushbutton switches – one switch controls spot, the other switch controls flood
    ▹ press and hold either switch for 0.5 seconds for on or off
    ▹ from on, press again to change brightness
    ▹ always turns on in last brightness level used
• battery status indicators on switches glow for 3 seconds when light is switched on
    ▹ press either switch to display status
    ▹ green – 85-100% remaining power
    ▹ flashing green – 50-85% remaining power
    ▹ red – 25-50% remaining power
    ▹ flashing red – 1-25% remaining power
• lockout mode prevents headlamp from turning on
    ▹ press and hold either switch or both switches for 3 seconds
    ▹ light will blink 3 times to indicate locked status
    ▹ to unlock, simultaneously press both switches for 3 seconds
• intelligent overheat protection
    ▹ output will drop down a few lumens to prevent overheating when internal temperature reaches 65 degrees C